User Manual

73
9) LNB: Press <Left/Right> button to select proper LNB type
according to your physical LNB type.
Press<OK> button to setup LNB configuration as below picture
a. LNB: Use <Left/Right> button to select the LNB
b. L.O. Frequency: Enter the proper LNB frequency referring to your
LNB by using the numeric key on the keypad.
c. LNB Voltage: Use <Left/Right> button to select the LNB power.
d. LNB Dish: Use <Left/Right> button to select the dish type, Fixed
or Moved
e. DiSEqC Switch: Use <Left/Right> button to select DiSEqC type
f. DiSEqC Input: Use <Left/Right> button to select the port number
to get the RF signal from the LNB ,which is connected .to DiSEqC
switching box .Range 1~4.
g. DiSEqC Repeat: Number of repeat of the DiSEqC command.
h. 22KHz Switch: Use <Left/Right> button to select switch 22KHz