User Manual

78
12) Network search: Use <Left/Right>button to choose ON/OFF
13) TP SCAN: Scan transponders one by one. Press OK to start scan
channel.
14) SAT SCAN: Scan all the transponders in one satellite (these
transponders have been set)
Note: In the course of signal searching, you can see the bar meter
of the LEVEL and QUALITY, at the same time the LOCK light
will come on with the speaker notification. DiSEqC will indicate
which port is connected to the DiSEqC 1.0 switch
15) Signal Information
 Press F1 to display the signal information
You can see the bar meter of the LEVEL and C/N.
Use <Left/Right> or mute button to adjust beep alarm volume.