User Manual

85
10) Network Search:
Press <Left/Right> button to select Network Scan mode ON/OFF.
11) Scan the possible frequency and bandwidth to receive the
programs, then Press <Up/Down> button to TP Scan or Auto Scan.
Note: In the course of signal searching, you can see the bar meter
of the LEVEL and C/N, at the same time the LOCK light will come
on with the speaker notification
 TP Scan:
Scan transponders one by one on default frequency and bandwidth.
 Press <Up/Down> button to TP Scan.
 Press <Left/Right> button to select TP Scan mode.
 Press <OK> button, one message box will be displayed
 Press <OK> button to delete the existing program and start the
TP Scan. Or press <Exit> button to save the existing program and
start the TP Scan.