Installation & Assembly_2

Adjustable Mantel Assembly Instruction:
8. Scribe moldings - measure the inside width and height. The horizontal scribe
is designed to be completely adjustable based on the needed interior width.
Cut scribe boards in the routed ends and in equal lengths to meet your desired
total length. Connect the pieces using the metal plate and 4 screws. Measure
the inside height and cut the vertical scribes on the flat end so that they miter
to the top horizontal scribe. Depending on the gap between the front of the
mantel and the non-combustible surrounding firebox, the scribes may need to
be ripped down to the back. Please consult a professional.
cut on these ends
cut on these ends
left right
scribe mouldings
inside length
inside height
top scribe moulding
top scribe moulding
x x x x
9. Secure the scribe moldings with finishing nails or glue.
Scribe
Mouldings
10. Installation for Mantels and Shelves using
the Hanger Board
For hanging your shelf, we suggest that you
use the hanger board included in this box.
The type of hardware (not included) you will
use for mounting your hanger board will
depend upon the medium your shelf will be
attached to (i.e. brick, stone, drywall...)
Please consult a professional for advise on the
proper hardware.
Mounting hardware for hanger board and scribe moldings not included
Scribe Moldings
Scribe Moldings