Installation Instructions

10
FREIGHT DOORS
I
CAR GATES
I
CAR ENCLOSURES
TECHNICAL SUPPORT 1-800-787-5020 ext 275
THE PEELLE COMPANY
®
Guide No.
Date:
224-EN
WIRELESS CONTROLLER
INSTALLATION & INTERFACE GUIDE
May 13 / 2021
2.9 LANDING DOOR ZONE SWITCH (ZNS)
The landing door Zone Switch located in top of interlock box activates the controller for the Landing door at
which the elevator car is located.
HDCHDO ZNS EUD
STOP
AUX1
INPUT
COM
V- V+
AUX2
1 2 3 4 5 6 7
Door Lock Contact (DI)
connect to elevator controller
e ZONE indicator will go ON solid when the
ZNS contact is made for the door connected to
that controller when elevator is at the landing with
retiring cam extended
ZONE turns OFF when the retiring cam lis.
When the retiring cam lis the ZNS contact is
open and the ZONE indicator turns o.
Attention!
The ZONE must be made for
automatic door operation. If ZONE
is not made doors will not run.
e input indicator 3 will go ON solid when the
ZNS contact is made for the door connected to
that controller.
Interlock
Landing Door
Controller