Installation Instructions

11
FREIGHT DOORS
I
CAR GATES
I
CAR ENCLOSURES
TECHNICAL SUPPORT 1-800-787-5020 ext 275
THE PEELLE COMPANY
®
Guide No.
Date:
224-EN
WIRELESS CONTROLLER
INSTALLATION & INTERFACE GUIDE
May 13 / 2021
2.10 LANDING DOOR HALL PUSHBUTTONS
HALL DOOR OPEN BUTTON (HDO) 1
Where provided, wire landing station door OPEN pushbuttons
as shown. When elevator car is within landing ZONE,
pushbutton inputs will be transmitted to the Car Door controller
for connection to elevator control.
HALL DOOR CLOSE BUTTON (HDC) 2
Where provided, wire landing station door CLOSE pushbutton
as shown. When elevator car is within oor ZONE, pushbutton
inputs will be transmitted to the Car Door controller for
connection to elevator control.
DOOR STOP BUTTON (STOP) 5
Where provided, wire landing station door STOP pushbutton as
shown. The door STOP button should be normally open (NO). If
normally closed (NC) set parameter 96 to 01. See DOOR STOP
output for connection to elevator control.
HDCHDO ZNS EUD
STOP
AUX1
INPUT
COM
V- V+
AUX2
1
2 3 4 5 6 7
STOP
CLOSE
OPEN
e input indicators 1 2 and 5 will go ON when the
pushbutton is activated for the door connected to that controller.
Landing
Door
Controller