Installation Instructions

22
FREIGHT DOORS
I
CAR GATES
I
CAR ENCLOSURES
TECHNICAL SUPPORT 1-800-787-5020 ext 275
THE PEELLE COMPANY
®
Guide No.
Date:
224-EN
WIRELESS CONTROLLER
INSTALLATION & INTERFACE GUIDE
May 13 / 2021
4.3 LANDING AND CAR DOOR OPERATION AND TESTING
With elevator control inputs removed, test the following Sequence of Operation using the OPEN, CLOSE and
RETCAM buttons.
1. Remove elevator control inputs to DO, DC, SE, DCM
2. Make sure the controllers are set to AUTO
3. Use the OPEN, CLOSE and RETCAM buttons to test the door and car door
and retiring cam sequence of operation.
RET
CAM
CLOSEOPEN ENTER
+
_
IND
AUTO
4.4 SEQUENCE OF OPERATION
After power-up with the elevator car at a landing, upon automatic initiation
of either open or close, the landing door and car door will operate at
learn speed until the nal open or closed position is reached and held for
1 second. The control will reset the learned prole and initiate DOOR
OPEN or DOOR CLOSED output. All unzoned landing door controllers
will power up to normal prole See Parameter 93.
4.5 POWER UP MODE / LOSS OF POWER
Attention!
Landing door and Car door
settings and speed proles are
retained by the controller when
power is removed. It is not
necessary to relearn the opening.
Note 2
For USER 1/2 options
see parameter 65/85
Note 1
Landing door and car door operation will
be simultaneous when DCM 4 input is
used.