Installation Instructions

24
FREIGHT DOORS
I
CAR GATES
I
CAR ENCLOSURES
TECHNICAL SUPPORT 1-800-787-5020 ext 275
THE PEELLE COMPANY
®
Guide No.
Date:
224-EN
WIRELESS CONTROLLER
INSTALLATION & INTERFACE GUIDE
May 13 / 2021
5.2 ELEVATOR TO DOOR CONTROLLER OUTPUT CONNECTIONS
HALL OPEN - output relay
Contact closes when zoned hall door open button is pressed.
HALL CLOSE - output relay
Contact closes when zoned hall door close button is pressed.
DOOR STOP - output relay
Normally open contact closes and normally closed contact opens,
when zoned hall door stop button is pressed
or doors are stuck.
REVERSING EDGE - output relay
Output - normally open contact closes and normally closed contact
opens when edge is activated.
DOOR OPEN - output relay
Normally open contact closes and normally closed contact opens
when landing door and car door are open.
DOOR CLOSED - output relay
Normally open contact closes and normally closed contact opens
when landing door and car door are closed
USER 1 - output relay
Default: Normally open contact
closes and normally closed contact
opens when both landing door and
car door are 3/4 open.
Option: see parameter 65
USER 2 - output relay
Normally open contact closes and
normally closed contact opens when
both landing door and car door are
3/4 closed.
Option: see parameter 85
Attention!
See Parameter 97 for power-
up mode relay condition.
NOTE
Elevator controller interface
connections to the Car
Door Controller ONLY. No
connection to landing door
controller.
HALL
OPEN
HALL
CLOSE
DOOR
STOP
REVERSING
EDGE
DOOR
OPEN
DOOR
CLOSED
USER 1USER 2
NC
COM3
NO
COM1
NO
NO
V+
+
RE
-
USER 2 USER 1
COMCANHCANL
DOOR
CLOSED
DOOR
OPEN
BUZZER
REVERSING
EDGE
INPUT
REVERSING
EDGE
OUTPUT
NC
COM2
NO
NO COM7 NC NO COM6 NC NO COM5 NC NO COM4 NC
DOOR
STOP
HALL
BUTTONS
Car Door
Controller