Installation Manual

ISSUED: 01-28-03 SHEET #: 200-9472-3 06-22-13

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-865-2112

1 of 2

Remove Plasma TV from cart prior to setting cart down

on its back side. Remove existing casters from the bot-

tom of Plasma Cart.

PART # QTY. DESCRIPTION

A 600-1025 4 leveler feet

Parts List

Installation & Assembly - Leveler Feet

IMPORTANT! Read entire instruction sheet before you start assembly and installation.

Model: ACC 310

Plasma Cart

Caster

PAGE 1
Installation & Assembly - Leveler Feet Model: ACC 310 IMPORTANT! Read entire instruction sheet before you start assembly and installation. Parts List PART # QTY. A 600-1025 4 DESCRIPTION leveler feet A 1 Remove Plasma TV from cart prior to setting cart down on its back side. Remove existing casters from the bottom of Plasma Cart. Plasma Cart Caster 1 of 2 Visit the Peerless Web Site at www.peerlessmounts.
PAGE 2
Screw four leveler feet (A) to bottom of plasma cart. Note: Turn leveler feet equally to level cart. Plasma Cart A 3 Stand Plasma Cart up and check cart for level. Adjust leveler feet by hand or using a wrench. Plasma Cart 2 of 2 Visit the Peerless Web Site at www.peerlessmounts.com © 2013 Peerless Industries, Inc. All rights reserved. Peerless is a registered trademark of Peerless Industries, Inc.