Installation User Manual

6 of 12
ISSUED: 05-13-11 SHEET #: 145-9012-8 2013-06-25
B
B
3
SECURITY SCREW
Attach adapter brackets (B) to display carriage. Slide adapter brackets (B) into position.
Loosely fasten in place using security screw as shown in detail 1.
NOTE: Once display is located in desired position, tighten security screws using 4mm allen wrench (K) to lock in
place.
Attaching Adapter Brackets to Display Carriage
DETAIL 1
Attach adapter brackets (B) to back of display using four M6 x 12 mm socket pin screws (I) with nylon shoulder
washer (H), or four M8 x 15 mm socket pin screws (J) as shown below.
B
H
I or J
2
400 mm
300 mm
200 mm
MAX VESA-400 mm
MIN VESA-200 mm
Attaching Adapter Brackets to Display
DISPLAY
DISPLAY CARRIAGE
600 mm