Installation User Manual

9 of 12

ISSUED: 05-13-11 SHEET #: 145-9012-8 2013-06-25

Open pull-out mount assembly (A) by releasing locking tab. Push or pull up on locking tab as shown below.

NOTE: Extended position is for service access only. The mount must be closed during normal use and operation.

Open and Close Pull Out Mount Assembly

Display cables can be routed through top or bottom of pull-out mount assembly (A).

NOTE: Use mesh sleeve (M) and cable ties (L) for cable management.

NOTE: Cable ties and cable management slots on pull-out mount assembly (A) can be used to secure display

cables.

Cable Management

DETAIL 3

CABLE MANAGEMENT

SLOTS

LOCKING TAB

PULL UP

PUSH UP