Installation and Assembly: In-wall Mount for up to 40" Flat Panel Displays Models: IM740P, IM740P-S Max UL Load Capacity: 80 lb (36.3 kg) 2300 White Oak Circle • Aurora, Il 60502 • (800) 865-2112 • Fax: (800) 359-6500 • www.peerlessmounts.
Note: Read entire instruction sheet before you start installation and assembly. WARNING • Do not begin to install your Peerless product until you have read and understood the instructions and warnings contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, please call Peerless customer care at 1-800-865-2112.
Before you begin, make sure all parts shown are included with your product. Parts may appear slightly different than illustrated. Parts List IM740P Qty. Part # 1 095-P1536 IM740P-S Part # 095-C4536 A Description in-wall box B #10 x 1.
Installation to Wood Stud Wall WARNING • Installer must verify that the supporting surface will safely support the combined load of the equipment and all attached hardware and components. • Tighten wood screws so that wall plate is firmly attached, but do not overtighten. Overtightening can damage the screws, greatly reducing their holding power. • Never tighten in excess of 80 in. • lb (9 N.M.). • Make sure that mounting screws are anchored into the center of the stud.
Installing Articulating Arm to In-wall Box 2 Choose hole pattern on interior mounting plate of in-wall box (A) which align with hole pattern on the wall plate of PA740 articulating arm (AA). Mounting hole alignments may be selected for different height installations. NOTE: Consider position of display center or routing of cables before securing arm to in-wall box. Drill two 5/32" (4 mm) holes 2.5" (65 mm) deep using interior mounting plate holes of in-wall box (A) as a guide.
Cable Management For optional installation of electrical gang box, access plates located on the bottom or top of in-wall box can be temporarily removed to install electrical gang box as shown in figure 4.1. 4 fig. 4.1 ACCESS PLATE DISPLAY NOT SHOWN FOR CLARITY 4-1 Insert up to four cable management clips (F) into the desired positions in the in-wall box as shown in figure 4.2 for routing cables. Refer to instruction included with PA740 articulating arm (AA) for cable management with arm.
LIMITED FIVE-YEAR WARRANTY Peerless Industries, Inc. (“Peerless”) warrants to original end-users of Peerless® products will be free from defects in material and workmanship, under normal use, for a period of five years from the date of purchase by the original end-user (but in no case longer than six years after the date of the product’s manufacture). At its option, Peerless will repair or replace, or refund the purchase price of, any product which fails to conform with this warranty.
