User Manual

2018-11-28 #:180-9122-1

Mac Calibration Instructions

For most operating systems and display orientations calibration is not required. If the touch points are not being

registered accurately please follow the instructions below for calibrating your IR Touch Overlay. You will need

to connect a mouse until your IR Touch Overlay is calibrated properly.

1. Please go to the following website https://www.imanageshare.com/pd/AicFN9Jx2hM and download

the calibration software for the operating system that you are using.

2. Plug the USB from the IR Touch Overlay into the computer or media player that is being used.

3. Install the software on the computer or media player being used with the IR Touch Overlay.

4. Open the Zaagtech Multi-Touch software.

5. If the Zaagtech Multi-Touch software is not detecting the IR Touch Overlay, please restart your

computer or media player.

6. Once the computer or media player is rebooted all touches should be registering accurately. If this

is not the case please open the Zaagtech Multi-Touch Software and click on calibration.

7. Spinning targets will appear on the screen. Touch and hold the spinning targets until they stop

spinning and display the next target. After all targets have registered it will take you back to the

main screen in the software.

8. If the connected Mac or Mac OS based media player support multi-touch, Click “Ok” at the bottom

of the calibration panel. If the connected Mac or Mac OS based media player only supports single

touch, click the mouse button in the top menu of the Zaagtech Multi-Touch software and then click

“Ok” at the bottom of the calibration panel. Touch on the desktop to make sure that the touches are

registering accurately. If the touches are registering accurately the calibration process is complete.

If the touches are not registering accurately restart the connected restart the connected Mac or Mac

OS based media player. Once fully booted verify that the touches are registering accurately. If the

touches are still not registering accurately please contact Peerless-AV Customer Care at 800-865-

2112 and ask to speak with one of our “PeerTech Pros” for further assistance.

ENG