Installation Manual

ManualsBrandsPeerless-AV ManualsMonitorsLCFS-100S

ISSUED:02-25-03 SHEET #: 095-9149-3 08-11-04

1 of 6

Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.

Model: LCFS 100,

LCFS 100S

Installation and Assembly - Vision•Point

™

LCD Screen Pedestal Stand -

75/100 mm Adapter Plate

Read instruction sheet before you start installation and assembly.

Maximum Load Capacity:

25 lb (11.3 kg) - freestanding when feet are in outward

position

40 lb (18.1 kg) - bolted down to floor with screens over

25 lb or when feet are moved inwards

Summary of content (6 pages)

PAGE 1
Installation and Assembly - Vision•Point™ LCD Screen Pedestal Stand 75/100 mm Adapter Plate Model: LCFS 100, LCFS 100S Read instruction sheet before you start installation and assembly. Maximum Load Capacity: 25 lb (11.3 kg) - freestanding when feet are in outward position 40 lb (18.1 kg) - bolted down to floor with screens over 25 lb or when feet are moved inwards 1 of 6 Visit the Peerless Web Site at www.peerlessindustries.
PAGE 2
Parts List Description Qty. LCFS 100 LCFS100S A base foot weldment 2 095-1152 095-4152 B main base weldment 1 095-1154 095-4154 C 75/100 mm LCD mount weldment 1 095-1156 095-4156 D main support tube 1 095-1157 095-4157 E mating base tube 1 095-1134 095-4134 F angled support tube 1 095-1158 095-4158 G M4 x .7 x 10 mm phillips screw 4 504-9012 520-2027 H M4 x .7 x 12 mm phillips screw 4 504-9013 504-2013 I M4 x .
PAGE 3
WARNING • If base foot weldments (A) are positioned all the way outward, the Pedestal Stand can support up to a 25 lb (11.3 kg) LCD screen without being bolted down to the floor. If the base foot weldments (A) are positioned inward along the base and/or the screen weighs more than 25 lb, the Pedestal Stand MUST be bolted down to the floor. Slide base foot weldments (A) into desired position on main base weldment (B) as shown below. Make sure upper tube is perfectly perpendicular with floor.
PAGE 4
Installation To Wood Floors Use a stud finder to find centers of floor joists. Use base foot weldments (A) as a template to mark holes. Drill four 3/16" (5 mm) dia. holes to a minimum depth of 1-1/4" (32 mm). Place four retaining spacers (M) over holes. Place base foot weldments (A) over retaining spacers (M) and secure with four #14 x 1-1/4" wood screws (L). L A M Insert half of mating base tube (E) into main base weldment (B) and attach using two set screws (K).
PAGE 5
Insert angled support tube (F) into main support tube (D) in orientation shown. Adjust support tube (F) to the desired height. IMPORTANT: In the highest position, the support tube (F) must be inserted at least 3-1/2" in the support tube (D). Attach using two 1/4" set screws (K). F D K INCORRECT CORRECT Slide LCD mount weldment (C) onto angled support tube (F). Adjust viewing angle by swiveling LCD mount weldment around support tube.
PAGE 6
Run cords through cord management holes as shown. cord management hole cord management hole This product is designed to accommodate screens with VESA® 75 or 100 compliant hole pattern. For safe mounting, please make sure that mounting screws turn at least three complete turns in the screen inserts. FOR VESA 75 MOUNTING PATTERN: 1.) Choose hole pattern indicated below. 2.) Attach LCD mount weldment (C) to back of screen using four 10 mm screws (G) as indicated below. 3.