Installation Owner's manual

1 of 4

ISSUED: 12-18-09 SHEET #: 125-9092-4 03-24-11

Installation and Assembly:

Ceiling Mount for Panasonic TH-85PF12U and TH-85VX200U

Model: PANA-85CEIL

Maximum Load Capacity:

300 lb (136 kg)PANA-85CEIL is not compatible with

AEC006009, and AEC012018 Models.

PAGE 1
Installation and Assembly: Ceiling Mount for Panasonic TH-85PF12U and TH-85VX200U Model: PANA-85CEIL Maximum Load Capacity: 300 lb (136 kg) PANA-85CEIL is not compatible with AEC006009, and AEC012018 Models.
PAGE 2
A B C D E F G H I J K L M Description tilt bracket cross support tube end cap fiber washer retaining collar M8 x 16 mm phillips screw M5 x 8 mm phillips screw M16 x 30 mm socket screw M16 split washer washer M6 x 6 mm set screw 5/16 split washer 5/16 flat washer C D I K 1 B A Parts List Qty.
PAGE 3
2 Secure tilt brackets (A) to cross support tube (B) using four M8 x 16 mm phillips screws (F), 5/16 split washers (L), and 5/16 flat washers (M) in desired tilt position as shown in fig. 2.1 and 2.2. Once tilt is established secure two end caps (C) to cross support tube (B). F L B A C 5° 10° 15° 20° A A Fig. 2.2 Fig. 2.1 3 M Secure two M5 x 8 mm phillips screws (G) to ends of cross support tube (B) as shown below.
PAGE 4
Hook display standoffs into keyhole slots onto tilt brackets (A). NOTE: Make sure that standoffs fall to the bottom of keyhole as shown in detail 2. Secure display to tilt bracket (A) using two M16 x 30 mm socket screws (H), M16 split washers (I), and washers (J) as shown in detail 3.