Installation Instructions

EXT 006, EXT 006S, EXT 018, EXT 018S,
EXT 101, EXT 101S, EXT 102, EXT 102S,
EXT 103, EXT 103S, EXT 104, EXT 104S,
EXT 105, EXT 105S, EXT 106, EXT 106S,
EXT 107, EXT 107S, EXT 108, EXT 108S,
EXT 109, EXT 109S, EXT 110, EXT 110S
IMPORTANT! Read entire instruction sheet
before beginning installation and assembly.
Installation and Assembly - Fixed Length
Extension Columns
Models:
Insert Jumbo 2000 Mount onto end of extension column followed by fiber washer and
retaining collar. Tighten retaining collar securely - four or five complete turns. Align one hole
in side of retaining collar with slot. Lock with one M5 x .8 x 10 mm phillips screw.
Thread extension column into threaded fitting in ceiling plate. Tighten securely - four or
five complete turns. Align slot with one hole in side of threaded fitting. Lock extension
column with one M5 x .8 x 10 mm phillips screw.
ISSUED: 4-27-93 SHEET #: 026-9001-4 03-15-05
Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.
1 of 1
• For a safe installation be sure to lock extension
column and retaining collar as instructed.
WARNING
© 2005 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
Note: 20
O
angle hole.
Jumbo
2000
Mount
Ceiling Plate
for Jumbo
2000 Mounts
Jumbo
2000™
Mount
Ceiling Plate
for Jumbo
2000
Mounts
Extension
Column
fiber washer
retaining
collar
Note: 20
O
angle hole.
Extension Column
Note: Retaining
collar, fiber
washer, and M5
x .8 x 10 mm
phillips screws
are included
with Jumbo
2000 Mount.
threaded
fitting
• For safety extension column must be locked to threaded fitting with screw!
WARNING
• For safety retaining collar must be locked to extension column with screw!
WARNING
Extension
Column
R
This product is intended for use with UL
Listed products and must be installed by a
qualified professional installer.