Specifications

PRGS Projector Mount
For projectors up to 50lb (22kg)
The PRGS Projector Mount simplies the way image alignment is done. The precision gear
design allows exact pitch and roll image positioning by either simply turning two adjustment
knobs with a Phillips screw driver, or using the tool-less option by extending the knobs to adjust
by hand. Just set the precision gear to the desired position to secure it in place. It will hold its
position even during projector maintenance. With Peerless-AV
®
PRGS Projector Mount, just
set it and forget it. No more adjustment screws. No more micro adjustments. No more hassles.
Pin-point image
alignment
PIN-POINT IMAGE ALIGNMENT
Achieve pin-point image alignment by
simply turning the adjustment knobs by
hand or with a Phillips screwdriver
Max load: 50lb (22kg)
PRGS-UNV(-S)(-W)
 Two adjustment knobs to
control tilt and roll image
alignment and accurately
hold image position,
virtually eliminating any
sag or drift
 Specications:
Pitch: +15°/-20°
Roll: ±5°
Swivel: 360° (during installation)
 Pre-installed security screws
provide tilt and roll locking
ability to prevent tampering
and adjustments
 Low prole design allows
projector to be ush with
the ceiling
 Open frame assembly
provides easy cable
routing through the
projector mount itself
 Quick release mechanism
to easily service projector
FEATURES
UNIVERSAL COMPATIBILITY
Includes the Spider
®
Universal
Adapter Plate which extends
up to 17.63" (448mm) to t most
projector models
EFFORTLESS PROJECTOR
MAINTENANCE
Quick-release thumbscrew
enables easy-glide removal
of the projector in and out
of the mount
CLICK: peerless-av.com CALL: 800.865.2112 FAX: [phone]