Spec Sheet

Peerless-AV’s Heavy Duty Projector Mount is designed to simplify the installation and
alignment of heavy, large venue projectors. The Hook-and-Hang
TM
feature provides
a large landing area when securing a projector to the mount. The tilt, roll and swivel
features are all lockable to prevent even the smallest shift to the image. Dedicated
adaptor plates are made for each OEM projector manufacturer and are designed to
place the center of gravity in the center of the mount, making adjustments eortless.
Universal mounts are not recommended for these heavy projectors as they can be
dicult to balance which can lead to projector sag over time.
- Pre-assembled design reduces
installation time
- Dedicated adaptor plates reduce
sag and simplify adjustments
- Cable management allows cables
to be routed through projector
mount and out of sight
- A safety cable is included
to provide a second level of
assurance
- Multiple locations are built-in to
secure cabling from the column to
the projector
- Tilt: /-°
Roll: °
Swivel: °
- Simple Hook-and-Hang™ design
eases the installation of heavy
projectors
- ." (mm) of lateral shift built
into the mount
- Works with Peerless-AV
®
ADD,
AEC, EXT, MOD extension
columns
Heavy Duty Projector Mount
FOR LARGE VENUE PROJECTORS UP TO LB .KG
PJ R 250
LOW PROFILE DESIGN
Creates an aesthetically
appealing look
LOCKING TILT
Lock the projector at any angle
with the adjustment screws
HORIZONTAL ADJUSTMENT
Slide the projector side-to-side, up
to ", for perfect image alignment
HOOKANDHANG™
INSTALLATION
Large landing area allows heavy
projectors to be installed easily
DEDICATED ADAPTOR PLATE (sold separately)
Dedicated adaptor plates are designed to each
specic projector’s center of gravity
Shown with PAP-NEC
Dedicated Adaptor Plate
Max load
250lb (113.4kg)
[e-mail]
Driving Technology Through Innovation
peerless-av.com