Installation Instruction Manual

ISSUED: 11-26-07 SHEET #: 202-9259-3 04-11-13
Visit the Peerless Web Site at www.peerless-av.com For customer service call 1-800-865-2112
1 of 1
IMPORTANT! Read entire instruction sheet before you start
installation and assembly.
Some parts may appear slightly different than illustrated.
Model: PLP-V2X2
C
Maximum Load Capacity : 125 lbs (57 kg)
Installation and Assembly - Adapter Bracket for VESA
®
200 x 200 Screens
B
D
E
G
H
Begin with shortest length screw (E or F), hand thread through adapter plate into screen as shown below.
Screw must make at least three full turns into screen insert and fi t snug into place. Do not over tighten. If
screw cannot make three full turns into screen insert, select a longer length screw (B, D or H). Repeat for
remaining holes.
© 2013, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.
A
F
I
Used with specifi c
mounts only
G
#10 washer (G) is only to be
used with M4 x 8 mm socket
pin serrated washer head
screw (F), M4 x 12 mm socket
pin serrated washer head
screw (H) or M5 x 10mm
socket pin screw (I).
Washer goes between screw
and adapter plate.
• Do not overtighten! Overtightening may cause permanent damage to the screen. Torque to 26-35 in • lb
(30-40 kg • cm).
WARNING
Qty. Part #
A 1 202-1505
B 4 520-1050
C 1 560-9646
D M6 x 20mm socket pin screw 4 520-9554
E 4 520-1706
F M4 x 8mm sock pin serrated washer head screw 4 510-1005
G 4 540-9400
H 4 510-1079
I M5 x 10mm socket pin screw 4 520-1063
#10 washer
M4 x 12mm socket pin serrated washer head screw
Parts List
Description
adapter bracket
M6 x 12mm socket pin screw
4mm allen wrench
M8 x 10mm socket pin screw
B, D, E, F,
or H
A