Installation Instructions

ISSUED: 11-26-2007 SHEET #: 202-9259-4 05-04-2017
Visit the Peerless Web Site at www.peerless-av.com For customer service call 1-800-865-2112
1 of 2
IMPORTANT! Read entire instruction sheet before you start
installation and assembly.
Some parts may appear slightly different than illustrated.
Model: PLP-V2X2
C
Maximum Load Capacity : 125 lbs (57 kg)
Installation and Assembly - Adapter Bracket for VESA
®
200 x 200 Screens
B
D
E
G
H
Begin with shortest length screw (E or F), hand thread through adapter plate into screen as shown below.
Screw must make at least three full turns into screen insert and t snug into place. Do not over tighten. If
screw cannot make three full turns into screen insert, select a longer length screw (B, D or H). Repeat for
remaining holes.
A
F
I
Used with specic
mounts only
G
#10 washer (G) is only to be
used with M4 x 8 mm socket
pin serrated washer head
screw (F), M4 x 12 mm socket
pin serrated washer head
screw (H) or M5 x 10mm
socket pin screw (I).
Washer goes between screw
and adapter plate.
• Do not overtighten! Overtightening may cause permanent damage to the screen. Torque to 26-35 in • lb
(30-40 kg • cm).
WARNING
B, D, E, F,
or H
A
Parts List
Part #Description Qty
A adapter bracket 1 202-1063
B M6 x 12mm socket pin screw 4 520-1050
C 4mm allen wrench 1 560-9646
D M6 x 20mm socket pin screw 4 520-9554
E M8 x 10mm socket pin screw 4 520-1706
F M4 x 8mm serrated washer head screw 4 510-1005
G #10 SAE washer 4 540-9400
H M4 x 12mm serrated washer head screw 4 510-1079
I M5 x 10mm socket pin screw 4 520-1063