Owner's manual

Universal Articulating Wall Arm
for 40" to 75" Displays
From any angle, this wall arm mount reects remarkable form and function. Retracting the at panel
display to a mere 2.6" (66mm) from the wall, extending it out to 26.54" (674mm) from the wall and allowing
for a full 180° of side to side motion offers the possibility of perfectly positioning displays up to 75". A double
stud installation creates a more sound design for heavier displays. With advanced features such as post-
installation height adjustment, roll and lateral shift, ne-tuning of the installation is quick and simple. This
articulating arm also integrates an internal cable management system that creates a clean and organized
installation, while at the same time protecting the cables. Integrate an in-wall cable and power accessory
into the wall plate cutout to complete the installation. Designed and built in the USA, this mount maintains
the same brilliant quality you expect to nd with the SmartMount
®
Series of Articulating and Pivot Wall Arm
Mounts, but provides the premium features you can only nd with SmartMountXT
TM
.
Display size: 40"-75" Max load: 110lb (50kg)
SAX762PU
 Low-prole when retracted at
2.6" (66mm) and can extend
up to 26.54" (674mm) from the
wall
 Internal cable management
provides ample area to run
cables to complete a clean,
professional installation
 Stylish wall plate covers create
a nished look and are easy to
install and remove
 One-Touch™ tilt mechanism
allows adjustment of +15/-5°
without the use of tools
 ±5° of roll for post-installation
leveling
 Display can be rotated from
landscape to portrait without
removing the display
 ±0.5" of vertical adjustment
for post-installation height
adjustment ne-tuning
 Open wall plate design and
cutout increase electrical and
cable management options
 Double stud installation
FEATURES
LANDSCAPE TO PORTRAIT
Rotate the display from landscape to
portrait without having to remove it
CLICK: peerless-av.com CALL: 800.865.2112 FAX: [phone]
±5° OF ROLL
For quick post-installation leveling adjustments
ONE-TOUCH™ TILT
No tools required
for viewing angle
adjustments
VERTICAL ADJUSTMENT
Up to 1" (25.4mm) of vertical adjustment
for ne-tuning the height of the display
OPEN WALL PLATE
Wall plate cutout perfectly
integrates the ACCXT400
for in-wall cable routing
and powering the display
INTERNAL CABLE MANAGEMENT
Creates a clean, professional
installation while protecting and
organizing the cables
Contact your Peerless-AV sales representative for more information
Optional Accessory
ACCXT400
Arm retracts to just 2.60"
(66mm) and extends up to
26.54" (674mm) from the wall
Up to 1" (25.4mm)
of height adjustment
Patented. Design Patent No. D623,634.
Utility Panent No. 8,561,955.