Install Instructions

ManualsBrandsPeerless ManualsBoilersPF-210 - 168,000 BTU Output PUREFIRE High Efficiency Residential Boiler (Nat Gas)

Table Of Contents

4. Condensate Neutralizer Container: The condensate

neutralizer container is an additional transparent

container near the front of the boiler. Fill this

container with the condensate neutralizer provided.

The neutralizer will be consumed during normal

operation and should be checked occasionally to

determine if additional neutralizer is necessary.

Neutralizer is available in 1 lb bags (#54159) from

your PB Heat Distributor.

5. Bulkhead fitting: The bulkhead fitting allows the

condensate tubing to pass through the jacket without

providing a path for leakage from the jacket. A PVC

TEE is to be attached to the outlet of this fitting to

prevent siphoning of the trap.

6. Neutralizer: Condensate neutralizer is provided in a

package with the boiler to fill the condensate

neutralizer container (Item 4).

7. Neutralizer Cap: This cap provides access for adding

and inspecting the condensate neutralizer.

8. Condensate Drain Tube: This pre-formed tube

connects the condensate system to the bulkhead

fitting for attachment to an external drain.

C. CONDENSATE DRAIN PIPE MATERIAL

The condensate drain is to be piped using PVC,

polypropylene, or other material resistant to acidic

condensate. Do not use steel, brass or galvanized pipe for

this purpose. The acidic condensate will attack most

metals and corrode.

D. CONDENSATE DRAIN PIPE SIZING

The bulkhead fitting for condensate connection is for 3/4"

schedule 40 PVC Pipe. Be sure to use 3/4" or larger

tubing from the boiler to the drain.

E. CONDENSATE DRAIN PIPE INSTALLATION

1. Connect a 3/4" schedule 40 PVC Tee to the outlet of

the bulkhead fitting as shown in Figure 6.3. Pipe from

the bottom of the tee to a suitable drain.

2. Be sure that the piping slopes away from the boiler

with a pitch of 1/4" per foot of pipe.

3. If the boiler condensate drain is above the level of a

gravity drain, a condensate pump should be used.

Table 6.1 lists several available brands. Contact your

PB Heat, LLC Distributor for availability.

CONDENSATE DRAIN PIPING

Brand Name Model Number

ITT Bell & Gossett LS

Little Giant VCMA-15UL

Beckett CB151LSUL

Hartell KT-15-1UL

Table 6.1: Recommended Condensate Pumps

Figure 6.3: Condensate Drain Piping