Installation Guide

ManualsBrandsPeerless ManualsBath1-Handle Tub and Shower Faucet Trim Kit in Chrome (Valve Not Included)

SINGLE HANDLE WASHERLESS PRESSURE

BALANCED TUB & SHOWER VALVES

MODELS P188775, PTT188780 & PTT188790

VÈLVULAS DE REGADRAY BAÑERA DE PR(6,ÏN

BALANCEADA SIN ARANDELAS

MODELOS P188775, PTT188780 & PTT188790

02'Ê/(6P188775, PTT188780 & PTT188790

ROBINET DE BAIGNOIRE/DOUCHE MONOCOMMANDE

¬ ÉQUILIBRAGE DE PRESSION

Estimated Time For Assembly

The estimated time to install this tub and shower valve is 85 minutes.

These estimates do not include removing the old shower system.

Tiempo Estimado para Instalar

El tiempo estimado para instalar esta válvula de bañera y regadera es

85 minutos. Estos estimados no incluyen el tiempo que tomaría quitar el

sistema viejo de regadera.

Durée G¶LQVWDOODWLRQ estimée

Le temps requis pour l’installation du robinet de baignoire-douche est

estimé à 85 minutes. L’estimation n’inclut pas la dépose de la vieille

robinetterie de douche.

You may need

Usted puede necesitar

Articles dont vous pouvez avoir besoin:

(NOT PROVIDED)

For faucet removal/installation.

Llave(s) y Destornillador:

(NO PROPORCIONADAS)

Para quitar/instalación delavamanos .

Clé(s) et Tournevis:

(NON FOURNIS)

pour pose et dépose de robinet

Record Your Model Number Here For Future Reference

Anote Aquí Número del Modelo Comprado Para Referencia Futura

Inscrivez le numéro de modèle ici pour pouvoir le retrouver.

Instruction Manual Printed in China

Manual de Instrucciones Impreso en China

Manuel d’instructions Imprimé en Chine

1 66621 Rev.F

The Peerless

Installation Helpline

1-800-438-6673

www.peerlessfaucet.com

ASSEMBLY PARTS LIST

LISTA DE PIEZAS PARA LA INSTALACIÏN

LISTE DES 3,Ê&(6

Description

Descripción

Description

Quantity

Calidad

Quantité

Showerhead

Cabeza de Regadera

Pomme de douche

Shower Arm & Flange

Brazo de Regadera y Brida

Pomme de douche et collerette

Trim Sleeve

Manguito

Manchon de Finition

Valve Body & Cartridge Assembly

Cuerpo de la Válvula y Ensamble del Casquete

Corps de robinet et Cartouche

Tub Spout (Diverter)

Tubo de Salida para Bañera (Desviador)

Bec de baignoire avec dérivation

Lever Handle w/Screw

Palanca con Tornillo

Manette avec vis

Escutcheon

Chapetón

Boîtier

Escutcheon Screws

Tornillos para chapetón

Vis pour boîtier

Plumber tape:

(NOT PROVIDED)

For use on threaded connections.

Cinta para plomero:

(NO PROPORCIONADAS)

Para uso con conexiones enroscadas.

Ruban de plomberie:

(NON FOURNI)

Pour application sur le filetage des raccords.

Hole Dimensions

(minimum and maximum

hole size in wall for valve

installation)

Las Dimensiones

de los Hoyos

(el tamaño del hoyo mínimo

y máximo en la pared para

la instalación de la válvula)

Dimension du trou

(dimensions minimales et

maximales du trou dans la

paroi pour l’installation de la

soupape)

3 1/2"–5"

(89 mm–127 mm)

ASME A112.18.1 / CSA B125.1

3/22/13

Spacer

Separadores

Piéce D’espacement

P188775

PTT188780

PTT188790

Wrench(es) and Screwdriver:

Summary of content (8 pages)

PAGE 1
SINGLE HANDLE WASHERLESS PRESSURE BALANCED TUB & SHOWER VALVES MODELS P188775, PTT188780 & PTT188790 VÈLVULAS DE REGADRA Y BAÑERA DE PR(6,ÏN BALANCEADA SIN ARANDELAS MODELOS P188775, PTT188780 & PTT188790 ASME A112.18.1 / CSA B125.
PAGE 2
1 2 5 1 2 3 A 4 B Study recommended valve configurations on stringers or framing: (A) Tub/Shower, (B) Shower Only. SHUT OFF WATER SUPPLIES Remove old valve. Install new valve so that the arrows on the bracket (1) point upward. For shower only installation, plug bottom valve outlet with pipe plug (2) (not supplied). Note: Distance (3) from the stringer (4) to the front of the plasterguard is 2 3/4" ± 1/4" (70 mm ± 6 mm). This is the same distance to the finished wall (5).
PAGE 3
4 A. 1 B2. B1. OO) OO 2 3 2 1 #ppl[ RNWODGT VCRG #plique cinta para plomero #ppliquez rWDCP FG RNQODGTKG 4 4. A. SHOWERHEAD AND TUB SPOUT INSTALLATION 4. ,167$/$&,Ï1 '( /$ &$%(=$ '( /$ 5(*$'(5$ < (/ 6857,'25 '( /$ %$f(5$ A. 2#4# .#5 +056#.#%+10'5 &' .
PAGE 4
6 5 2 3 4 1 5. FLUSH SYSTEM/ CHECK FOR LEAKS. Place handle on valve stem and turn handle to full on mixed position. Turn on hot and cold water lines to full open for one minute each. Check for leaks. Shut off water at faucet. 6. Remove handle (1). Attach escutcheon (2) with screws provided. Install spacer (3) into sleeve. Attach sleeve (4). Adjust the rotational limit stop (see Step 7). After adjusting the rotational limit stop, secure handle with set screw. 5.
PAGE 5
7 Hotter Caliente Plus chaude Disc Disco Disque Stem Unidad del Vástago Obturateurs Rotational Limit Stop Tope de Limite de Girar Butée anti-échaudage 1st Position Posición Primera 1ère Position ADJUSTING THE ROTATIONAL LIMIT STOP: Turn on water so that cold water is as cold as it will get and hot water is as hot as it will get. Place handle back on stem and rotate fully counterclockwise to the hottest position. Place a thermometer in a plastic tumbler and hold in the water stream.
PAGE 6
▲ Specify Finish Especifíque el Acabado Précisez le Fini Valve Body Cuerpo de la Válvula Corps de robinet 3 RP46074 Brackets Abrazaderas Supports Valve Cartridge Válvula de Cartucho Cartouche RP6023▲ Shower Arm Brazo de Regadera Pomme de douche RP6025▲ Flange Brida collerette RP70537▲ Showerhead Cabeza de Regadera Pomme de douche 2 RP14414 1 RP4993 O-Rings Anillos "O" Joints Toriques Seats & Springs Asientos y Resortes Sièges et Ressorts RP44117 ▲ Lever Handle w/Button & Screw Palanca con Botone y
PAGE 7
and apply or attach the label to the back side of the closet cabinet door and the warning label to the hot water heater. Leave this instruction sheet for the owner's/user's reference. THIS VALVE MEETS OR EXCEEDS THE FOLLOWING STANDARDS: ANSI A112.18.1, CSA B125 AND ASSE1016 CAUTION: This system/device must be set by the installer to insure safe, maximum temperature. Any change in the setting may raise the discharge temperature above the limit considered safe and may lead to hot water burns.
PAGE 8
Peerless® Lifetime Faucet and Finish Limited Warranty All parts and finishes of the Peerless® faucet are warranted to the original consumer purchaser to be free from defects in material & workmanship for as long as the original consumer purchaser owns their home. Peerless Faucet Company recommends using a professional plumber for all installation & repair.