User's Manual

10 C3648M (7/08)
OPENING THE CHASSIS
1. Make sure you protect the unit and its components, which are susceptible to damage from improper handling and ESD. Refer to the
Safe Handling of Hard Drives document (C2668M) for more information.
2. Use a Phillips screwdriver to remove the chassis cover (refer to Figure 3):
a. Remove the top two screws on the left and right side panels of the DX8100.
b. Remove the four silver screws (along the top of the unit) that fastens the cover to the back of the unit.
c. Carefully remove the chassis cover by sliding it back and up. Set aside the cover.
Figure 2. Removing the Chassis Cover
WARNINGS:
• Make sure the unit is turned off and you are wearing a properly grounded ESD wrist strap before attempting to open the chassis cover.
• The chassis assembly includes parts with sharp edges. To avoid injury, use caution when working in and around the DX8100 chassis
and components.