User's Manual

12 C3648M (7/08)
MOVING THE MAIN CAPTURE CARD
In the DX8108 and DX8116 base DVRs, the main capture card is installed in slot 2. To install the DX8100-ISCI SCSI card, the main capture card
must be moved from slot 2 to slot 3. The DX8100-ISCI SCSI card must be physically installed in slot 2.
To move the main capture card from slot 2 to slot 3:
1. Prepare the main capture card for removal (refer to Figure 4):
a. Remove the rear cross-brace.
b. Remove the slot cover for slot 3 and retain the screw.
c. Remove the bracket screw that secures the main capture card in slot 2.
d. Disconnect the 32-pin ribbon cable.
e. Disconnect the 5-wire TV/Audio cable and lay the cable over the DX8100 I/O Card.
f. Disconnect the 7-wire TV/Audio cable.
g. Disconnect the 2-wire audio cable.
Figure 4. Preparing the Main Capture Card for Removal