User's Manual

C3648M (7/08) 13
2. Move the main capture card (refer to Figure 5):
a. Remove the capture card from slot 2 and firmly seat the capture card in the PCI connector for slot 3.
b. Secure the capture card bracket with the screw.
c. Reconnect the 5-wire TV/Audio cable.
d. Reconnect the 7-wire TV/Audio cable.
e. Reconnect the 2-wire audio cable.
NOTE: You will reattach the 32-pin ribbon cable after you install the SCSI card.
Figure 5. Moving the Main Capture Card
INSTALLING THE SCSI CARD
To install the DX8100-ISCI SCSI card:
1. Make sure the main capture card is installed in slot 3. Refer to Moving the Main Capture Card on page 12.
2. Install the SCSI card into slot 2 (refer to Figure 6):
a. Firmly seat the DX8100-ISCI SCSI card in the PCI connector for slot 2.
b. Secure the DX8100-ISCI SCSI card bracket with the screw removed from slot 3.
c. Reconnect the 32-pin ribbon cable to the first 32-pin connector (on the main capture card) in slot 3.
3. Replace the rear cross-brace.
Figure 6. Installing the SCSI Card