User's Manual

16 C3648M (7/08)
3. Install the drive trays:
a. On the DX8100HDDI front panel, place the drive tray 1 release button in the unlocked position (refer to Figure 10).
Figure 10. Drive Tray Key-Lock in Unlocked Position
b. Press the release button (refer to Figure 11). The front flap opens.
Figure 11. Opening the Drive Tray Door
c. Using the label on the drive tray, install the drive tray in the drive bay labeled with the same number (refer to Figure 8 on page 15).
Figure 12. Inserting the Drive Tray
d. Gently shut the drive tray door, and then return the release button to the locked position (refer to Figure 10).
4. Repeat step 3 to install all other drive trays in numerical order.
5. Verify that each drive tray is installed in the correct drive bay.
6. Return the retention latch to its closed position (refer to Figure 9 on page 15).
KEY-LOCK
RELEASE BUTTON
OPEN