User's Manual

30 C3648M (7/08)
19. Press and hold ENT for two seconds to initialize the logical drive.
Figure 36. Initializing Logical Drive
UNMAP THE LOGICAL DRIVE
20. After the logical drive is initialized, press the down arrow three times until “View and Edit Host Luns” appears.
Figure 37. View and Edit Host Luns
21. Press ENT three times until Delete CH0 ID0 LUN=00 Mapping appears (refer to Figure 38).
Figure 38. Delete LUN
22. Press and hold “ENT” for two seconds until you hear a beep.
23. From the DX8100HDDI front panel, press ESC twice to return to the main menu.
OBTAINING AN IP ADDRESS
24. Press the down arrow three times. The “View and Edit Config Params” menu appears.
25. Press Enter two times.
26. Press the down arrow once, and then press Enter two times. The IP address appears on the screen.
ESC ENT
PWR
BUSY
ATTEN
MUTE
ESC ENT
PWR
BUSY
ATTEN
MUTE
ESC ENT
PWR
BUSY
ATTEN
MUTE