Installation Guide

2
CONTEMPORARY FLOOR MOUNT TUB FAUCET (cont.)
Step 8- Slide #25 decorative escutcheon down
to cover floor flange.
Step 9- Tighten optional support bracket to
risers and drain
FIGURE 5 Supply line spacing
Step 10- Attach small end of #18 hand
shower hose with #30 washer to outlet below
diverter faucet handle.
Step 11- Attach large end of #18 hand shower
hose to #16 hand shower with #30 washer and
place in holder.
Step 12- Connect preferred ½” pipe (supplied by
installer) into female threaded riser C-FRSR from
under flooring. Make hot/cold water connections.
Turn on water and check all connections for leaks.
16
30
30
18
8"