Installation Guide

7
8A Slide expander on door with
slots to the interior.
Install Expander
Screw Covers
8
8B Adjust the expander until the
sweep touches the threshold.
8C Secure expander with the #8 x 1/2" screws
from Bag D, located in the closer kit.
1
2
NOTE:
Straight leg towards
outside of rail (marked with
a dashed line)
Finishing Touches
9
Snap strips into place by anchoring the outer side rst
(Screw covers may need to be trimmed to length).
Start at the top ends and slide nger down strip
while pressing.
#8x1/2 in.
Painted