User guide

108
3
Taking Pictures
4 Use the four-way controller (23)
to change the setting.
You can check the results of available white
balance settings on the preview image each
time you press the four-way controller
(23).
5 Press the 4 button.
The setting is saved.
6 Press the 3 button.
The camera returns to capture status.
Refer to the following “Manual Setting” for instructions on adjusting the
white balance manually.
Have a blank sheet of white paper or similar material ready.
1 In the [White Balance] screen, use the four-way
controller (23) to select K (Manual).
2 Point the camera at the blank
sheet of paper or other material so
that it fills the frame displayed in
the center of the screen.
3 Press the shutter release button fully.
The white balance is automatically adjusted.
If you change the [White Balance] setting frequently, you can save time
by assigning it to the Green button (p.117).
Saving the White Balance setting 1p.123
Manual Setting
MENU
Cancel
C a n c e l
Auto
A u t o
OK
O K
OKCancel
Auto
OK
White Balance
MENU
Adjust
SHUTTER
White Balance
Cancel
C a n c e l
OK
O K
OKCancel
OK