User guide

212
8
Connecting to a Computer
1 Double-click the [Safely
Remove Hardware] icon in the
task bar.
The “Safely Remove Hardware” screen appears.
2 Select [USB Mass Storage Device]
and click [Stop].
The “Stop a Hardware device” screen
appears.
3 Select [USB Mass Storage Device]
and click [OK].
A message appears indicating that the
hardware can be safely removed.
4 Click [OK].
5 Disconnect the USB cable from your Windows PC and
the camera.
Disconnecting the Camera from Your Windows
PC
• If the camera (removable disk) is being used by an application such as
“ACDSee for PENTAX 3.0”, the camera cannot be disconnected until
the application is closed.
• The camera will automatically switch to the playback mode when the
USB cable is disconnected from your Windows PC or the camera.