Use And Care Manual

CONTROLS, COMPONENTS & ACCESSORIES

SPECIFIC SAFETY INSTRUCTIONS

This electric blower is a dual function device designed for blowing and sucking in and

around the garage, shop or home. It can be used to remove small debris, dust, shavings,

leaves, or blow dry water on a smooth surface. Not recommended for rough, porous or

uneven surfaces. This device is not designed for industrial applications. The device

cannot be used for other purposes than its intended use.

• Always wear sturdy shoes and sufficient clothing during operation. Do not wear loose

clothing that can be sucked into the suction tube.

• Keep long hair away from air intakes.

• Always use personal protective equipment, such as safety glasses and

hearing protection.

• Check thoroughly the area you are going to work on and remove all items that can be

sucked into the suction tube or blown away by the air blower.

• Do not begin working without air tubes, safety devices and covers installed in place.

• Hold the tool with both hands so the end of the pipe is not obstructed by the ground.

• Attach the extension cord to prevent its accidental disconnection.

• The tool should be repaired by authorized personnel only.

• Use only original spare parts recommended by the manufacturer.

• Never leave blower unattended while plugged in and/or operating. Allow blower to cool

periodically during use.

1. Blowing connector

2. Switch

3. Switch lock button

4. Suction connector

5. Nozzle

6. Collection bag

7. Carbon brush plug

8. Nozzle retaining ring

FRONT

BACK