Assembly Instructions Item # 245-1873 Model # M40TR5XDBLK USE AND CARE GUIDE 40‘’ 5 DRAWER TOOL CABINET Questions, problems, missing parts? Before returning to the store, call 1-866-441-5080 9 a.m – 6 p.m.
Table of Contents Table of Contents .................................................. 2 Assembly ............................................................... 5 Safety Information ............................................... 2 Operation .................................... .......................... 6 Limited Lifetime Warranty................................... 3 Maintenance ......................................................... 7 Specifications ...............................................
Limited Lifetime Warranty PERFORMAX® Tool Cabinets and Chests are warranted to be free from defects in materials and workmanship under normal use for the lifetime that you own the product. If any part of the product is found to be defective during normal use, the defective product or part will be replaced at our discretion. This warranty does not cover products that are damaged through accident, abuse, misuse, commercial/industrial applications or neglect.
Package Contents (continued) NOTE: Keys are inside the top drawer.
Assembly 1 2 Attaching the casters Attaching the cabinet handle □ Position the cabinet handle (B) over the holes on the cabinet (A). □ Attach with the bolts (BB) and tighten with supplied hex key (DD). □ Be sure the drawers are locked and lay the cabinet (A) □ Attach the swivel casters (D) to the unit, on the same side as the handle, inserting bolts (AA) through the swivel casters (D) and into the cabinet (A). Tighten with supplied hex key (DD) or 12 mm wrench/socket.
Operation 1 Removing the drawers □ □ □ Fully extend the empty drawer. Push up the one release lever while pulling down on the other release lever. Pull the drawer outward until it is released from the drawer slide. 2 Re-inserting the drawers □ □ □ Extend the drawer slides. Insert the brackets on each side of the drawer into the slots in the slides, being careful that they are properly positioned. Once properly inserted, completely close the drawer to set the slides in their proper positions.
Maintenance 1 □ □ 2 Caster maintenance □ Grease the casters annually using high-quality bearing grease. Drawer maintenance Lubricate the slides semi-annually with a high-quality bearing grease. Periodically clean the drawer fronts, drawer trim, and other surfaces with a mild detergent and water. □ Replacement Parts For questions about replacement parts, please call 1-866-441-5080.