Network Router User Manual

AS/400 Configuration to support
5250 Workstation Gateway continued...
Perle 5250 Configuration
PC Configuration for AS/400
Workstation Gateway access
You can use any type of operating systems supported by a Perle 833/833AS/833IS, which can run a graphical Web Browser.
Then do the following:
• Install a browser as Netscape or Explorer on your workstation.
• Dial-in to the Perle RAS using TCP/IP protocol.
• Start the browser and enter the following URL address to start the 5250 to HTML Workstation Gateway:
http://hostname:5061/WSG or http://AS/400 IP address:5061/WSG
Where:
http: Defines which protocol to be used.
hostname Identifies the system to be reach. This can be the name of the AS/400 or his IP address.
:5061 Is the default port for the Workstation Gateway server.
WSG Specifies to use the HTML Workstation Gateway function. WSG must be in uppercase.
Perle 5250 Configuration
www.perle.com
89-7400-01
Set AUTOSTART option to *YES
Set DISPLAY SIGN ON PANEL to *YES
and then press ENTER
4 End TCP/IP
5 Start TCP/IP
GO TCPADM
C1143 11/18/98 10:44 AM Page 3