User's Manual

189
Serial Port Profiles
Monitoring Tab Field Descriptions
Configure the following parameters:
Monitor Host
This is the host which is to be monitored via PINGs. If the host stops responding
to the PINGs, the power on this plug will be cycled in an attempt to recover the
host.
Default: None
Ping
z Interval -Specify the frequency ( in minutes ) at which the configured host
will be PING’ed.
Default - 15 minutes
z Timeout - Specify the length of time ( in seconds ) to wait for a reply
Default - 60 seconds
z Retries - Specify the number of times to re-try the PING when the host
does not reply. This is in addition to the orginial PING request.
Default - 2