Device Server User's Guide

Serial Port Profiles
96 IOLAN DS1/TS2 User’s Guide, Version 3.4
Enable Line Mode When enabled, keyboard input is not sent to the remote host until Enter is
pressed, otherwise input is sent every time a key is pressed.
Default: Disabled
Map CR to CRLF When enabled, maps carriage returns (CR) to carriage return line feed (CRLF).
Default: Disabled
Interrupt Defines the interrupt character. Typing the interrupt character interrupts the
current process. This value is in hexadecimal.
Default: 3 (ASCII value
^C)
Quit Defines the quit character. Typing the quit character closes and exits the current
telnet session. This value is in hexadecimal.
Default: 1c (ASCII value
FS)
EOF Defines the end-of-file character. When Enable Line Mode is enabled, entering
the EOF character as the first character on a line sends the character to the
remote host. This value is in hexadecimal.
Default: 4 (ASCII value
^D)
Erase Defines the erase character. When Line Mode is Off, typing the erase character
erases one character. This value is in hexadecimal.
Default: 8 (ASCII value
^H)
Echo Defines the echo character. When Line Mode is On, typing the echo character
echoes the text locally and sends only completed lines to the host. This value is
in hexadecimal.
Default: 5 (ASCII value
^E)
Escape Defines the escape character. Returns you to the command line mode. This
value is in hexadecimal.
Default: 1d (ASCII value
GS)