Network Router User Manual

User Commands
80 IOLAN Device Server User’s Guide, Version 1.0
Trueport Baud Commands
Set Trueport Remap-Baud
Description Sets the Trueport baud remapping values.
User Level Admin
Syntax
Options 50|75|110|134|150|200|300|600|1200|1800|2400|4800|9600|19200|38400
50|75|110|134|150|200|300|600|1200|1800|2400|4800|9600|19200|38400|
57600|115200|230400|460800|921600|1843200|3686400
Show Trueport
Description Shows the Device Server Trueport remapping table.
User Level Normal, Admin
Syntax
User Commands
Logged Into the Device Server Commands
Admin
Description Changes a Normal-level user to the Admin user. When you press Enter after you type
this command, you will be prompted for the Admin password.
User Level Normal
Syntax
Help
Description Displays help on using the command line interface (CLI).
User Level Restricted, Normal, Admin
Syntax
Kill Line
Description Restarts a line.
User Level Normal, Admin
Syntax
Kill Session
Description Kills an active session.
User Level Restricted, Normal, Admin
Syntax
Options 1|2|3|4
The number of the session(s) you want to kill.
set trueport remap-baud
50|75|110|134|150|200|300|600|1200|1800|2400|4800|9600|19200|
38400
50|75|110|134|150|200|300|600|1200|1800|2400|4800|9600|19200|
38400|57600|115200|230400|460800|921600|1843200|3686400
The configured baud rate of the Trueport client.
The actual baud rate that runs between the Device Server and the connected serial
device.
show trueport
admin
help
kill line
kill session 1|2|3|4