Network Router User Manual
Table Of Contents
- IOLINK-520 and IOLINK-PRO USER AND SYSTEM ADMINISTRATION GUIDE
- Installation
- Typical Applications & How to Configure Them
- 2.1 - Bridging and Routing
- Should You Bridge or Route?
- 2.2 Basic WAN Configurations
- 2.3 - Configure Remote Site Profiles
- 2.4 Advanced Features
- Introductionto Filtering
- Appendix AMenu Trees
- Appendix BOctet Locations on Ethernet Frames
- Appendix CServicing Information
- Opening the case
- Identifying the Internal Components
- To Clear a “Lost” Password
- Changing LAN or WAN Interfaces
- Selecting MDI or MDI-X LAN Interface
- Installing the ISDN Link Modules
- Processor settings for the ISDN Link Modules
- Changing the Termination Straps on the ISDN S/T Interface
- Connecting to the ISDN-U Link Module
- Performing a Software Upgrade
- Appendix DInterface Pinouts
- Pinout Information
- Link Clocking Information
- ATL-CSU/DSU Link Module Information
- Console Pinouts
- V.24 & RS232C Link Pinouts
- V.11/X.21 Link Pinouts
- RS442 & RS530 Link Pinouts
- V.35 Link Pinouts
- RS232 Null-Modem Cable Configuration
- V.35 Null-Modem Cable Configuration
- RS530 Null-Modem Cable Configuration
- RS530 To RS449 Conversion Cable
- V.11/X.21 Null-Modem Cable Configuration
- Index
- Warranty
Index
IOLINK-520 & IOLINK-PRO Installation & Applications Guide
N
NAT (Network Address Translation), 2.37
NAPT, 2.37
Negative Filtering, 3.1
Novell Server, 2.9, 2.10
Null Modem Cable, D.1
Numbered Links, 2.15
O
On Link, 2.35
Opening the case, C.1
P
Password, 2.37
password - clear lost, C.3
Pattern Filtering, 3.2
Popular Filters, 3.3
Bridge, 3.3
IP Router, 3.4
Positive Filtering, 3.1
Policy, IPSec, 2.40
PPP, 2.13, 2.21, 2.26
PPP encapsulation, 2.23, 2.29, 2.31, 2.39
PPP ISDN, 2.16, 2.26, 2.27
PPP Leased Line, 2.32
PPP Numbered Link, 2.13
PPP Security, 2.46
PPP Unnumbered Link, 2.14
Primary Link, 2.33
PVC, 2.20, 2.27
Q
Quick Start
Frame Relay, 2.23
ISDN, 2.19
Leased Line, 2.24
Security, 2.39
R
Remote Site Profile, 2.26
Frame Relay, 2.29
Frame Relay with ISDN backup, 2.34
ISDN, 2.26
Leased Line, 2.31
Security, 2.39
Reset Switch, 1.2
RS232 Null Modem Cable Configuration, D.8
RS442 & RS530 Link Pinouts, D.6
RS530 Null Modem Cable Configuration, D.10
RS530 To RS449 Conversion Cable, D.11
S
Secondary Link, 2.34, 2.41
Security, 2.39
SA (Security Association), 2.39
Security Level, 2.39
Servicing Information, C.1
Should you Bridge or Route?, 2.2
Soft Reset, 2.21
SPID, 2.20
Static IP Routes, 2.9, 2.10
Status LEDs, 1.10
Subnets, 2.6
Subnet Mask, 2.6
Subnet Size, 2.6
Switch type, 2.16
T
Typical Applications, 2.1
U
Unnumbered links, 2.14
V
V.11 & X.21 Link Pinouts, D.5
V.11/X.21 Null Modem Cable Configuration, D.12
V.24 & RS232C Link Pinouts, D.4
V.35 Link Pinouts, D.9
V.35 Null Modem Cable Configuration, D.9
VPN (Virtual Private Network), 2.39