User's Manual

100

Advanced

Host Table

Overview

The Host table contains the list of hosts that will be accessed by an IP address or Fully Qualified

Domain Name (FQDN) from the IOLAN. This table will contain a symbolic name for the host as

well as its IP address or FQDN. When a host entry is required elsewhere in the configuration, the

symbolic name will be used.

Functionality

You can configure up to 50 hosts using IPv4 or IPv6 internet addresses on desktop IOLAN models;

you can configure up to 100 hosts on rack mount and medical unit IOLAN models.

Field Descriptions

Configure the appropriate parameters:

IP Filtering Data Options:

z Allow all traffic—Allows any host to connect to the IOLAN.

z Allow only defined traffic

Allow traffic only to/from hosts defined with IP

addresses—A security feature that when enabled, the

IOLAN will only accept data from or send data to hosts

configured in the IOLAN’s

Host Table.

Allow traffic to/from address range—A security feature

that when enabled, the IOLAN will only accept data from

or send data to hosts configured within this IPV4 address

range.

Default: Allow all traffic

Add Button Adds a host to the host table.

Edit Button Changes a host that already exists in the host table.