Extra Tall Retractable Gate 2727 2756 2728 Up To 1.8m (71’’) Wide 104cm Tall (41’’) IMPORTANT! READ AND FOLLOW THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE. This product complies with safety standard ASTM F1004.
Read this instruction manual carefully and keep it in a safe place for future reference. The correct use and maintenance of this product is essential.
Clean using warm soapy water, or a damp cloth. Towel or air dry.
PART LIST Wall Spacers x6 Upper Gate Mounts x1 Catch Mounts x2 Lower Gate Mounts x1 Screws and Wall Plugs x8 If any parts are missing do not attempt to use your Retractable Gate. Please contact us at www.permachildsafety.com/contact to obtain replacements. Only use parts supplied by the manufacturer with your Retractable Gate.
IMPORTANT Gate must be installed in a structurally sound opening. Ensure mounting surface (wall, door frame, stair posts, etc.) is strong, rigid and has an even surface. Note: If using gate on stairs, it must be placed either on the top step or on the lowest step at the bottom. Select the appropriate fixing method from the following list. This barrier must only be fixed to a solid and secure surface. To install you will need a Phillips screwdriver, pencil and drill.
2 WAYS INSTALLATION Inside opening or doorway Outside opening or doorway 5
INSTALLATION INSIDE OPENING OR DOORWAY 1. 2cm (3/4’’) Note: leave at least 2cm (3/4’’) between guide and the edge of the opening to ensure gate won’t overhang edge. 1. Hold guide vertically and completely outstretched against mounting surface with the end marked “FLOOR” even with the floor. Mark screw hole positions. Remove the template. Repeat process for another side. 2. 2. Align each mount in its correct position, use a Phillips screwdriver to tighten screws till each mount is secure.
Caution: Incorrect installation of catch mount inside opening can be dangerous.
3. 3. Attach Gate Assembly to the Gate Mounts by aligning the gate directly above the mounts and sliding straight down over mounts. Check that the Gate assembly is flush against the wall and is locked firmly in place. Note: Lower gate mount has a locking groove. To Remove. 2. 1. Lock Release To remove gate from the mounts push and hold the lock release button while sliding the gate upwards.
INSTALLATION OUTSIDE OPENING OR DOORWAY 1. Follow step 1 from “Installation Inside Doorway or Opening”. 2. 2. Align each mount in its correct position, use a Phillips screwdriver to tighten screws till each mount is secure.
INSTALLATION WITH SKIRTING/BASEBOARD To help correct for the offset of a skirting board or baseboard spacers will be required. Measure the width of your skirting/baseboard and use the closest number of spacers to fit this width. Each spacer is 5mm(1/5’’)thick. Note: Only use spacers for the Upper Gate mount and the Upper Catch.
OPERATION Push Twist & Release Pull 1. To unlock the mechanism, simply push down and turn the button clockwise. 2. Release the button and pull the handle toward the catches. 3. Hook the handle onto the catches ensuring both the top and bottom are aligned. Note: When gate is retracting always hold the handle and guide the gate evenly back into its original position. Never let go of handle when gate is retracting. CLEANING INSTRUCTIONS Use a soft damp cloth simply wipe gate, dry after cleaning.
WARRANTY CERTIFICATE Congratulations! You have made an excellent choice of this quality product. Our commitment to quality also includes our service. Should you, contrary to expectations, experience defects due to manufacturing faults, we will provide you with a warranty against defects as follows: Warranty The product is guaranteed to be free from defects in workmanship and parts for a period of 12 months from the date of purchase.
Retractable Gate Warranty Card Details: Product Name: Extra Tall Retractable Gate Product Number: White 2727 | Grey 2756 | Black 2728 (Please circle) Your Name: Address: Phone: Email: Date of Purchase: Location of Purchase: We recommend that you keep a copy of your receipt, showing the date of purchase, with this warranty certificate and keep for your reference. In the event of a product fault, please contact after sales support.
