Use and Care Manual

ManualsBrandsPERMANIZER ManualsPaint1 gal. PPG1080-4 Siesta Dreams Satin Exterior Paint

Architectural Coatings PPG Permanizer Exterior 100% Acrylic Latex Satin

GENERAL DESCRIPTION PRODUCT DATA

RECOMMENDED SUBSTRATES

FEATURES / BENEFITS

Permanizer Exterior paint is ideal for use on properly prepared exteri-

or wood, brick, masonry, concrete, weathered aluminum, weathered

vinyl siding and primed metal substrates. Vinyl siding and similar plas-

tic composites should not be painted with a color darker than the orig-

inal color. Painting vinyl siding or plastic composites with a darker

color may cause them to warp. Color selection for use over vinyl sid-

ing is limited. For information, call 1-800-441-9695.

Aluminum Ferrous Metal Stucco

Brick Fiber Cement Vinyl

Concrete Masonry Wood

PRODUCT TYPE: 100% Acrylic

GLOSS: Satin: 15 to 25 @ 60º

VOLUME SOLIDS*: 41% +/- 2%

WEIGHT SOLIDS*: 53% +/- 2%

WEIGHT/GALLON*: 10.4 lbs. (4.7 kg) +/- 0.2 lbs. (91 g)

VOC*: <50 g/L (0.4 lbs./gal.)

*Product data calculated on product 769-10.

COVERAGE: 250 to 300 sq. ft.. (23 to 27 sq. meters) per US gallon

(3.78 L)

Wet Film Thickness: 5.3 - 6.4 mils

Wet Microns: 135 - 163

Dry Film Thickness: 2.2 - 2.6 mils

Dry Microns: 56 - 64

Coverage does not include variation due to application methods, sur-

face porosity, and/or mixing. Film build, color and gloss may vary

depending on the substrate’s porosity. More porous substrates may

require a second coat to achieve a uniform appearance.

DRYING TIME: Dry time @ 77ºF (25ºC); 50% relative humidity.

To Touch: 30 minutes

To Recoat: 4 hours

Dry time @ 35ºF (2ºC); 50% relative humidity.

To Touch: 3 to 6 hours

To Recoat: 24 hours

For optimum tannin blocking, allow the first coat to dry a full 24 hours

prior to application of a second coat. Drying times listed may vary

depending on temperature, humidity, film build, color, and air movement.

CLEANUP: Clean tools with warm soapy water.

DISPOSAL: Contact your local environmental regulatory agency for

guidance on disposal of unused product. Do not pour down a drain or

storm sewer.

FLASH POINT: Over 200ºF (93ºC)

PRODUCT INFORMATION

769-10 White & Pastel Base

769-20 Midtone Base*

769-40 Ultra Deep Base*

*Must be tinted before use.

Refer to the appropriate color formula book, automatic tinting equip-

ment, and or computer color matching system for color formulas and

tinting instructions.

769-10

PERMANIZER

769-10 Series

Read Label and Safety Data Sheet prior to use. See other cautions on last page.

Features Benefits

One Coat Hide* Saves time and money compared to traditional two-coat products

100% Acrylic Outstanding durability

Outstanding Dirt Resistance Provides a clean appearance

Enhanced UV Resistance Color stays true

Excellent Adhesion Minimizes peeling and cracking

Provides a midlew and algae resistant coating Stays clean

Application Down to 35°F Extends the painting season

Limited Lifetime Warranty Warrants against cracking, peeling, & flaking on residential homes

*Some colors, drastic color changes, or porous surfaces may require more than one coat to achieve a uniform finish

CONFORMANCE STANDARDS

VOC compliant in all regulated areas

1-Gallon (3.78 L)

5-Gallon (18.9 L)

Not all products are available in all sizes.

PACKAGING

Summary of content (3 pages)

PAGE 1
PERMANIZER® Architectural Coatings PPG Permanizer Exterior 100% Acrylic Latex Satin GENERAL DESCRIPTION PRODUCT DATA Permanizer Exterior paint is ideal for use on properly prepared exterior wood, brick, masonry, concrete, weathered aluminum, weathered vinyl siding and primed metal substrates. Vinyl siding and similar plastic composites should not be painted with a color darker than the original color. Painting vinyl siding or plastic composites with a darker color may cause them to warp.
PAGE 2
769-10 Series Permanizer Architectural Coatings PPG Permanizer Exterior 100% Acrylic Latex Satin GENERAL SURFACE PREPARATION Surface must be clean and dry. Remove all loose, peeling paint, dirt, mildew, grease, oil, chalk, rust, and any other surface contaminants. Repair all moisture problems. Blistering and peeling issues are commonly caused by moisture behind the paint film. Putty all nail holes and caulk all cracks and open seams. Sand all glossy, rough and patched surfaces.
PAGE 3
769-10 Series Permanizer Architectural Coatings PPG Permanizer Exterior 100% Acrylic Latex Satin APPLICATION INFORMATION Stir thoroughly before using and occasionally when in use. When using more than one can of the same color, intermix to ensure color uniformity. USE WITH ADEQUATE VENTILATION. KEEP OUT OF REACH OF CHILDREN. Read all label and Safety Data Sheet (SDS) information prior to use. SDS are available through our web site or by calling 1-800-441-9695.