PetSafe Bark Control Collar ® ™ Operating Guide Please read this entire guide before beginning
Thank you for choosing PetSafe®, the #1 selling brand of electronic training solutions in the world. Our mission is to ensure your pet’s safety by providing you the tools and techniques to successfully train your pet. If you have any questions, please contact the Customer Care Center at 1-800-732-2677 or visit our website at www.petsafe.net. ____________________________________________________________________ Table of Contents Components .....................................................................
Components RFA -67 BAT Y6 TER V Battery (PetSafe® RFA-67) AF E PET PP R H A S S S PetSafe Bark Control Collar™ Y OWN E Bark Control W ar Video CD compatible with most DVD players and computer CD-ROM drives ra nt y VHS Tape available through our Customer Care Center at 1-800-732-2677 Streaming Video available at www.petsafe.
TM How the PetSafe Bark Control Collar Works TM The PetSafe Bark Control Collar effectively and humanely stops barking when it is worn. When the vibration of your dog’s bark triggers the Sensor Probe, a Static Correction is administered through the Contact Points. The Bark Control Collar starts with the lowest level of Static Correction and then increases through 6 levels each time your dog barks within 30 seconds of the previous bark.
Fit the Bark Control Collar Important: The proper fit and placement of your Bark Control Collar is important for effective operation. The Contact Points must have direct contact with your dog’s skin on the underside of his neck. To assure a proper fit, please follow these steps: 1. Make sure that the battery is not installed in the Bark Control Collar. 2. Start with your dog standing comfortably. 3. Place the Bark Control Collar high on your dog’s neck close to the ears.
Important: For comfort, safety and effectiveness of product, please ensure the following: • Check the fit to prevent excessive pressure by being able to insert one finger between the Contact Point and your pet’s skin. • Your dog must be carefully examined daily for any signs of a rash or sore. • If a rash or sore is observed, discontinue the use of the Bark Control Collar for a few days. • If the condition persists beyond 48 hours, see your veterinarian.
To Insert and Remove the Battery Note: Do not install the battery while the Bark Control Collar is on your dog. This Bark Control Collar utilizes a replaceable PetSafe® battery (RFA-67). This unique battery is designed to make battery replacement easier and increase water protection. To insert the battery, align the symbols on the battery (arrow) and Bark Control Collar (triangle). Use a large coin to turn the battery clockwise until the arrow lines up with the lock symbol on the housing.
What to Expect During Use of the Bark Control Collar Important: Do not leave your dog alone the first few times he receives a Static Correction. Place the Bark Control Collar properly on your dog and wait nearby until he barks. Most dogs will understand very quickly that the Bark Control Collar is disrupting their urge to bark and will relax and stop barking. Because the Static Correction from the Bark Control Collar may be surprising or startling at first, some dogs may bark more at the initial correction.
To Test the Bark Control Collar Slide the Sensor Probe across a rough surface for at least 10 inches. The Bark Control Collar should beep. If your Bark Control Collar doesn’t beep during this test, see “The Bark Control Collar does not beep” in the “Troubleshooting” section, and continue with the second step.
Frequently Asked Questions Will my dog stop barking completely? • The Bark Control Collar effectively and humanely stops all barking when it is worn. It should only be worn during periods of unwanted barking. My dog has a sensitive nature. Can I lower the Static Correction level? • You can obtain a resistor to reduce the Static Correction level by contacting the Customer Care Center at 1-800-732-2677. Will another dog’s bark set off the Bark Control Collar? • No.
Troubleshooting The Bark Control Collar does not beep. • Test the Bark Control Collar (see “To Test the Bark Control Collar” section). • If your Bark Control Collar does not beep during this test, try the same test on a rougher surface. • Ensure that the battery is properly installed. • Replace the battery. • If the Bark Control Collar still does not beep, contact the Customer Care Center at 1-800-732-2677. My Bark Control Collar beeps, but my dog keeps barking (does not respond to the Static Correction).
Terms of Use and Limitation of Liability 1. Terms of Use This Product is offered to you conditioned upon your acceptance without modification of the terms, conditions and notices contained herein. Usage of this Product implies acceptance of all such terms, conditions, and notices. 2. Proper Use This Product is designed for use with pets where training is desired. The specific temperament of your pet may not work with this Product.
