Operation Manual

129
8
Child safety
a: Universal child seat: child seat that can be
installed in any vehicle using the vehicle's
seat belt.
b: Group 0: from birth to 10 kg. Infant car
seats and "car cots" cannot be installed on
the front passenger seat.
When installed on the 2
nd
row, they may
prevent the use of the other seats
c: Refer the legislation in force in your country
before installing your child on this seat.
d: To install a child seat on a rear seat,
rearward or forward facing, move
the vehicle's seats in front forwards
and straighten the backrests to leave
enough space for the child seat and the
child's legs.
e: When a rearward facing child seat is
installed on the front passenger seat,
the passenger's front airbag must be
deactivated. Otherwise, the child would
risk being seriously injured or killed
during deployment of the airbag.
When a forward facing child seat is
installed on the front passenger seat,
the passenger's front airbag must remain
active.
Remove and stow the head restraint
before installing a child seat with a
backrest on a passenger seat. Refit the
head restraint once the child seat has
been removed.
U: Seat suitable for the installation of a
universally approved child seat secured
using a seat belt, rearward facing and/or
forward facing, with the passenger seat
adjusted to the midway longitudinal position.
U (R): same as for U, with the vehicle's seat in
the fully back position and the backrest
straightened.