Operation Manual

146
Practical information
Fitting the "space-saver"
type spare wheel
If your vehicle is fitted with alloy wheels,
it is normal to notice when tightening
the wheel bolts that the washers do not
come into contact with the "space-
saver" type spare wheel. The wheel is
secured by the conical contact surface
on each bolt.
Fitting a wheel
F Remove the bolts and put then in a clean
place.
F Remove the wheel.
F Raise the vehicle until there is sufficient
space between the wheel and the ground,
so that the (not punctured) spare wheel can
be easily fitted.