Operation Manual

18
Monitoring
Stop & Start
(VTi 68 S&S
engine)
flashing. The Stop & Start system has a fault. Have the system checked by a PEUGEOT dealer or a
qualified workshop.
Speed limiter fixed. The speed limiter has a fault. Have it checked by a PEUGEOT dealer or a qualified
workshop.
Door(s) open /
Boot open
fixed, accompanied by
an audible signal.
A door or the boot is still open. Close the door or boot.
Warning / indicator lamp State Cause Action / Observations
Under-inflation fixed. The pressure in one or more wheels
is too low.
Check the pressure of the tyres as soon as possible.
This check should preferably be carried out when the
tyres are cold.
You must reinitialise the system after the adjustment
of one or more tyre pressures and after changing one
or more wheels.
For more information, refer to the "Under-inflation
detection" section.