Operation Manual

48
Comfor t
Rear head restraints*
The rear head restraints can be removed and
have two positions:
- high, position for use.
- low, storage position.
To raise the head restraint, pull it upwards.
To lower it, press lug A then the head restraint.
To remove it:
- tilt the seat back slightly,
- move the head restraint to the high
position,
- press lug A pulling the head restraint
upwards at the same time.
To refit it:
- tilt the seat back slightly,
- engage the rods of the head restraint in the
openings.
* Depending on version.
To put the head restraint in the low position,
press lug A.