Operation Manual

57
3
Comfor t
For maximum cooling or heating of the
cabin, it is possible to go beyond the
minimum 14 or maximum 28 value.
F Press the temperature adjustment
button down or up until "LO" or
"HI" is displayed.
A setting around 21 gives optimum comfort.
However, depending on your requirements,
a setting between 18 and 24 is normal.
On entering the vehicle, if the interior is very
cold or hot, there is no need to change the
value displayed in order to reach the required
level of comfort. The system corrects the
temperature difference automatically and as
quickly as possible.
Temperature adjustment
F Press this button downward to
reduce the value and upward to
increase it.
The value indicated in the screen corresponds
to a level of comfort and not to a temperature in
degrees Celsius or Fahrenheit.
Air flow adjustment
F Press this button to increase air
flow.
The air flow symbol, the fan, fills progressively.
F Press this button to decrease air
flow.
Air distribution adjustment
- the centre and side air vents,
- the centre vent, side air vents and
footwells,
- the footwells,
- the windscreen and footwells,
- the centre vent, side air vents and
windscreen,
- the windscreen.
F Press this button repeatedly to
direct the air to:
Air intake / Air recirculation
Avoid prolonged recirculation of interior
air (risk of condensation or deterioration
of the air quality).
F Pressing this buttons isolates the
passenger compartment from the
outside air.
The air recirculation symbol is
displayed.
Air recirculation enables the passenger
compartment to be isolated from exterior odours
and smoke.
Press this button again or press the "AUTO"
button to resume automatic management of the
intake of air. The air recirculation symbol goes off.