Operation Manual

84
Driving
The speed limiter cannot, in any
circumstances, replace the need to
observe speed limits, nor can it replace the
need for vigilance on the part of the driver.
Speed limiter (PureTech 82 engine)
The speed limiter is switched on manually:
this can be done whatever the speed of the
vehicle. However, if you are driving at less than
20 mph (30 km/h), the programmed speed will
be fixed at 20 mph (30 km/h).
The speed limiter is paused by operation of the
control.
The programmed speed can be exceeded
temporarily by pressing the accelerator firmly
beyond the point of resistance.
To return to the programmed speed, simply
release the accelerator pedal until the vehicle
returns to the programmed speed limit.
System which prevents the vehicle from exceeding the speed programmed by the driver.
Steering mounted controls
The controls are grouped together on this
control stalk at the steering wheel.
1. Speed limiter on / off: by pressing the end
of the control stalk.
2. Decrease setting: by pushing the control
stalk down.
3. Increase setting: by pushing the control
stalk up.
4. Speed limiter on / pause: by pulling the
control stalk towards you
Displays in the instrument panel
The information is grouped together in the
instrument panel screen.
5. Speed limiter mode selection indication.
6. Speed limiter on / pause indication.
7. Speed value setting.
The programmed speed remains in the
memory when the ignition is switched off.