Operation Manual

88
Driving
F Press the end of the control stalk: the
speed limiter is switched on.
F Accelerate or decelerate to attain the
desired speed.
F Push the control stalk down and release, to
programme the speed.
The speed at which the vehicle is running
at the moment when you release the
control stalk becomes the programmed
speed.
Adjusting the speed limit
setting
Once a speed is programmed, you can modify
it by pushing and releasing the control stalk:
- up to increase the speed setting,
- down to reduce the speed setting.
A brief push on the control stalk modifies the
speed setting by + or - 1 km/h.
A maintained push on the control stalk modifies
the speed setting by + or - 5 km/h.
Switching on
This indicator lamp comes on in the
instrument panel.
Pause
F You can temporarily stop the the speed
limiter by pulling the control stalk towards
you.
F Push the control stalk up to restore
operation of the speed limiter with the
same speed setting.